Turntable Operation - Roadstar HIF-1898D+BT Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
5
English

TURNTABLE OPERATION

Note: When using the turntable for the first time, unscrew in clockwise sense the
[TRANSPORT SCREW] (27) located on the upper right side of the turntable.
1. Select "PHONO" mode by pressing repeatedly the [FUNCTION] button (4);
2. Place a record on the turntable. Place the EP adapter over the central spindle
when playing 45 rpm records;
3. Set the [SPEED SELECTOR] (31) to 33, 45 or 78 rpm according to the record;
4. Release the [TONEARM CLAMP] (29), and remove the stylus protector;
5. Lift up the [TONEARM] (28) with the [LIFT LEVER] (30);
6. Move the [TONEARM] (28) to the beginning of the record;
7. Lift down the [TONEARM] (28) with the [LIFT LEVER] (30);
8. When the record is finished the [TONEARM] (28) will automatically return to the
rest support and the [PLATE] (26) will stop turning. To stop manually, lift up the to-
nearm from the record and return it to the rest support.
Note: Do not stop or turn the [PLATE] (26) manually.
When the unit is moved or transported:
Lock the [TONEARM] (28) with the [TONEARM CLAMP] (29);
Place the protective cap on the stylus (even when not in use);
Screw the [TRANSPORT SCREW] (27) counterclockwise until you feel resistan-
ce (do not screw it completely).
CD-MP3 OPERATION
1. Select "CD" mode by pressing repeatedly the [FUNCTION] button (4);
2.
Press
[OPEN/CLOSE] (18) to
label up in the CD compartment.
3.
Close the
[CD DOOR]
automatically from the first track.
PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
1. Stop the playback by pressing [STOP] (14);
2. Press [PLAY MODE] (17), the display (6) will show "P01" and flash;
3. Select desired track by using [SKIP -/+] buttons (15/16);
4. Press [PLAY MODE] (17) again to confirm desired track into the program
memory;
5. Repeat step 3 and 4 to enter additional tracks into the program memory.
6. When all the desired tracks have been programmed, press [PLAY] (13) to play
the disc in the order you have programmed.
Note:
Press [STOP] (14) twice to terminate programmed play.
open the
[CD DOOR]
(12). Focus search is performed and playback will start
(12) and place a CD with the

Publicité

Table des Matières
loading

Table des Matières