Assembling Your Breville 800 Class Juicer - Breville JUICE FONTAIN ELITE Mode D'emploi

BR9007 800JEXL Book USA_CAN.qxp 11/10/07 9:15 AM

ASSEMBLING YOUR BREVILLE 800 CLASS JUICER

STEP 1. STEP 2.
Place Filter Bowl Surround on top of the Align the arrows on the Stainless Steel Filter Basket
Motor Base. with the arrows on the Motor Drive coupling and
push down until it clicks into place. Ensure the
Stainless Steel Filter Basket is fitted securely inside
the Filter Bowl Surround and onto the Motor Base.
10
ASSEMBLING YOUR BREVILLE 800 CLASS JUICER
Page 10
STEP 3.
Place the Juicer Cover over the Filter Bowl Surround,
positioning the Juicer Cover over the Stainless
Steel Filter Basket and lower into position.
STEP 4. STEP 5.
Raise the Safety Locking Arm up and lock into Slide the Food Pusher down the Feed Chute by
the two grooves on either side of the Juicer aligning the groove in the Food Pusher with the
Cover. The Safety Locking Arm should now be in small protrusion on the inside of the top of the
a vertical position and locked into place on top Feed Chute.
of the Juicer Cover.
STEP 5.1.
Continue to slide the Food Pusher down the
Feed Chute.
11
ASSEMBLING YOUR BREVILLE 800 CLASS JUICER