Charging Precautions; Maintenance; Battery Maintenance; Wheel Maintenance - iWatBoard R6 Mode D'emploi

5

CHARGING PRECAUTIONS

• Make sure you are charging it in a clean and dry environment; the socket must have a 100-240V voltage.
• The red light indicates it's charging.
• Once the scooter is charged, the light will turn green.
• For safety reasons, do not turn the scooter on while it's charging.
• Once you have finished charging it, unplug it from the socket.
6

MAINTENANCE

6.1 BATTERY MAINTENANCE

To avoid fully draining the power, please charge appropriately to extend battery life.
If you are not going to use your scooter for an extended period of time, we recommend you charge the battery
once a month.
Should you need to replace the battery, please contact your supplier's customer service.
The ideal storing temperature is between 15ºC and 25ºC
Do not use, nor store your scooter in environments in which the temperatures surpass 40ºC (such as the
inside of a car in direct sunlight) to avoid lithium battery failure or even explosion.

6.2 WHEEL MAINTENANCE

Periodically check the wheels in order to extend its lifespan. If the wheel presented any abnormalities, please
repair it or replace it timely, so as not to cause unnecessary damage during the riding.

6.3 CLEANING

If the scooter is stained/dirty, you can use a damp cloth to wipe it over. If the stain is difficult to clean, use a
small amount of soap and a clean toothbrush, then wipe with a wet cloth. Do not use chemical or corrosive
products.
21
electric
SCOOTER