iWatBoard iWatStreet ST2 Mode D'emploi page 7

Di s pl a y cont e nt s
4) Speed display area
Unit: Km/h
Your current speed is taken from the motors Holzer signal, which is then sent to the control panel via the controller. From there, the control panel will calculate
your actual speed, according to the signal data.
A) Please, hold down the
When the power is on, you can press the
B) When the power is on, hold down the
C) Press or to adjust your speed.
Posi t i o ns
Folded Position
button in order to turn on the device.
button and the LCD display will switch between ODO, DIS and TIME.
button to turn it off.
Parking Position Riding Position
| 7