Function Settings - iWatBoard iWatStreet ST2 Mode D'emploi

Funct i o n
1) Display
Speed display, Battery indicator, Error alarm, Total mileage and Current mileage.

2) Function Settings

Power switch control and Speed control
3) Communication Protocol: UART
Displays full content (One second after start-up)
Di s pl a y cont e nt s
1) Battery power indicator
2) Multi-function display area
ODO > Total mileage / DIS > Current mileage / TM > Running time / ERRO > Error code
3) The errors are shown above the battery indicator (ERRO)
· Motor Error: Light
· Turn Error: Flashing Light
4) In order to turn the front light on press the down button for a few seconds.
6 | ENGLISH
· Turning signal: Fixed Light
· Controller Error: Light