Urmet CAMERA Serie Guide Rapide page 38

EN
Option
Zoom
Focus
AF MODE
ONE SHOT
AF
TDN AF
LENS INIT
POWER
MODE
DS1099-002B
Value
Manually adjusts zoom (+ zoom in / - zoom out)
Step/-/+
Step: defines zooming speed
Manually adjusts focus (+ increase / - decrease)
Step/-/+
Step: defines focusing speed
This function is used to customise the camera focusing
mode. Possible options are:
SEMI +
SEMI: focusing is performed only after the zooming
AUTO +
operations are finished.
MANUAL
AUTO: focusing is adjusted automatically.
+ OFF
MANUAL: focusing is adjusted manually.
OFF: focusing and zoom are deactivated. Activate this
option after having adjusted focus and zoom as required.
/ Function not available.
ON + This function, when activate, allows automatic focus
OFF adjustment at each day -> night or night -> day switch.
This re-initialises the optics and obtained optical
calibration. To be performed when the camera is
/ installed for the first time and in case of movements
with consequent change of the framed picture.
IMPORTANT: do not use with AF MODE equal to OFF.
This is used to adjust the zoom whenever the camera is
SAVE switched back on.
POSI + SAVE POSI: this holds the zoom position set before the
OFF + camera was switched off.
WIDE OFF: do not save the settings stored before switch-off.
WIDE: the camera is switched on in Wide mode.
Explanation
38