Environmental Protection; Declaration Of Conformity - Würth F2 Traduction Des Instructions De Service D'origine

Maintenance / care
Important
In case of damages or corrosion, with-
draw the device from service work.
‰ Mark the spring balancer as defective and
inform the responsilble or superior.
We recommend to lubricate all moving parts and
wear points with a acid-free lubricant.
Visually inspect the following components
for corrosion or damages daily:
— Cable
— Antifall guard (1)
— Safety suspension (2)
Inspect the device on a regular basis, at least once
per year, for damages by a qualified person.
The device may not be used if it is
damaged.
.Guarantee
This WÜRTH device is covered by guarantee ac-
cording to the applicable national regulations. The
guarantee period begins on the date of purchase
(please retain invoice or delivery note as proof of
purchase).
Faults covered by guarantee shall be eliminated by
replacement or repair. Damage caused by improper
operation is not covered by guarantee.
Claims can be recognized only if the device is pre-
sented in a not-disassembled manner to a WÜRTH
branch office, your WÜRTH sales representative or a
customer service office authorized by WÜRTH.
12

Environmental protection

Do not dispose of the appliance
with domestic waste. Dispose of the
appliance only via an authorized
waste management company or
your municipal waste management
organisation. Adhere also to the
applicable regulations. In case of
doubt refer to your waste management organisation.
Recycle all packaging material in an environmentally
friendly manner.

Declaration of Conformity

We hereby declare that the appliance complies with
the relevant basic safety and health requirements of
the EU Directives, both in its basic design and con-
struction as well as in the version put into circulation
by us. This declaration shall cease to be valid if the
device is modified without our prior approval.
EC directive
— 2006/42/EC
Standards
— DIN EN 12100-1, DIN EN 12100-2
— DIN 15112
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PFW
74650 Künzelsau (Germany)
Chairman of General Manager
Adolf Würth
GmbH & Co. KG
Künzelsau: 10.08.2010