Device Elements; Device Data; Type Plate; Improper Use - Würth F2 Traduction Des Instructions De Service D'origine

Device elements

Before using the device, the operator must familiar-
ise himself with all device features and the applica-
ble safety instructions.
1
Anti fall guard
2
Safety suspension
3 Locking nut
4
Cable wedge socket
5 Ferrule
6
Cable clamp
7
Rubber buffer
8
Spring catch

Device data

Art.
Art.
Art.
Type series F2, F3, F6
Standard Load Cable extension
(kg) (m)
F2 0,5-2,0 2,5
F3 1,5-3,0 2,5
F6 3,0-5,5 2,5

Type plate

The type plate is fixed on the housing.
there, you will find data on the type series and the
admissible load range.
The type plate includes also the CE sign.
Introduction
These operating instructions have been compiled
for the devices of the following type series: F2, F3
and F6
The basic structure is identical, however, each series
type is designed for a specific load range.
These operating instruction provides information for
installation by adaequately trained specialist person-
nel and information concerning proper operation by
specially instructed personnel.
10
Proper use
‰ The device is exclusively designed for keep-
‰ Another or additional use shall be deemed to
‰ If the device is applied in a field not covered
‰ Spring balancers may only be operatied,
0715 938 12
0715 938 23
0715 938 36

Improper use

‰ The device may not be used as crane.
Dead load
(g)
750
800
Installation (fig.II)
900
be installed in the immediate vicinity of hot-air blow-
ers. The suspension structure to which the device and
the antifall guard (1) is to be fitted must be designed
with a safety factor of at least 5 (5 x [dead weight
of the spring ballance + maximum admissible load]).
‰ Install the device using the safety suspension (2).
‰ Ensure that the device cannot slip out of the
‰ When fasteing the antifall guard (1) to the
Proper application
ing hand-held tools, such as drilling machines,
compressed air screwdrivers etc.
be improper use! The manufacturer / supplier
will not accept any responsibility for damages
resulting from any improper use. Associated risks
shall be borne by the user alone.
by the proper use decribed above, any claim
of guarantee shall be void unless the written
approval of
Adolf Würth GmbH & Co. KG has been ob-
tained beforehand.
installed, maintained, and repaired by specially
trained personnel.
Start-up
Important
The device may only be put into
operation by authorized and trained
personnel.
Versions with plastic housings may not
safety suspension (2) ⇒ tighten locking nut (3).
suspension structure make sure that:
• The range of movement of the device is not
restricted.
• The falling distance does not exceed 100 mm!