Fence Layout - fortress EVOLVER Instructions D'installation

FENCE LAYOUT

Step 1: Sketch Layout of Fence Perimeter
1. Identify the property line and determine the perimeter of
your fence project.
2. Using a tape measure, determine the length of each
fence run.
3. Evolver Fence is easiest to install when starting from a
corner. If no gates are used, only one board in each line
should need to be cut.
4. Use the graph on page 6 to sketch out your fence project.
Fig. 1
End Post
HOUSE
FENCING INSTALLATION: EVOLVER
TOP VIEW
Corner
Post
Line
Post
Corner
Post
5