Rail & Fence Board Installation; Required Components - fortress EVOLVER Instructions D'installation

RAIL & FENCE BOARD INSTALLATION

Required Components:

• Top Rails
• Bottom Rails
• Intermediate Rails
• Side Rail Supports
• Fasteners
• Locking Clips
• Fence Boards
• Post Caps
• Post Cover Sliders
Step 1: Install Side Rail Supports
1. Slide Side Rail Supports into the Post Slots.
As shown in Fig. 1.
Note:
• Side Rail Supports are supplied in several lengths, that
can be cut to size to accommodate the changing
levels in your terrain, and can even be stacked on
top of each other.
• No other fastening is needed.
Fig. 1
Top View
Step 2: Install Post Cover Sliders
1. Place Post Cover Sliders into slots where Fence Boards are
not needed. As shown in Fig. 1.
Slide rail supports into place.
Rail supports are supplied in several lengths, that can be cut to size to accommodate the
changing levels in your terrain, and can even be stacked on top of each other.
No other fastening is needed for these, as the weight of the boards will hold them in place
Installation Guide - 2017
FENCING INSTALLATION: EVOLVER
STEP 3.
Cut Side Rail
Support To Size
6
11