fortress EVOLVER Instructions D'installation page 10

above ground. Be sure to check that posts are aligned
along guide strings & positioned correctly.
7. Pour concrete into holes and let it settle.
As shown in Fig. 2.
8. As concrete settles, Use a level to confirm that each post
base is mounted straight at a 90
Note:
• Some boundary lines may have service lines, electrics and
sewerage lines, that may run across them. You should
check to confirm that you are not digging into them.
Fig. 1
SECTION VIEW
Fig. 2
Post Base
11-13/16"
[300mm] Max
Check
Local Code
Step 2: Mount Post (Embedded/No Foundation)
1. Reference Post Mounting instructions on page 8, step 2.
10
HOUSE
Max. Post Base Spacing is 73" [1860mm ] .
Fence Board Width is 70-1/2" [1791mm].
Concrete
Gravel
FENCING INSTALLATION: EVOLVER
degree angle.
o
Ground Stake
Guide String
Post Base