Wine Guardian WRAWGHFSI Guide D'installation Rapide page 5

Fig. G
Fig. H
Fig. I
Fig. A
Fig. B
G. Slide the humidifier through the bracket
and attach at the side mounting loca-
tions. (Fig. F, G)
H. Re-install the humidifier front cover plate
by sliding the cover over the two top
plastic tabs and securing at the bottom
of the humidifier with two screws. (Fig.
H, I)
I. Plug in power/control wire to Wine
Guardian unit as shown at main control
panel. (Fig. J)
J. Proceed to Step 6—controller set up.
Fig. J
4. Install Freestanding Humidifier—Surface
Mount
A. Determine mounting location for the hu-
midifier within the wine cellar ensuring
the location has sufficient access for wa-
ter supply line, drain line, power cord and
service. (Fig. A)
B. Place the mounting bracket at the desired
location and mark the holes required to
mount the bracket to the wall. (Fig. A)
C. Attach bracket to wall using screws pro-
vided within humidifier. Note: Wall an-
chors may be required depending on
wall construction and stud
(Fig. B)
5
placement.