ENGLISH
C GETTING STARTED
, CHARGING YOUR APPLIANCE
•
Before using your groomer for the first time, charge for 14-16 hours.
•
Ensure the product is switched off.
•
Place your groomer into the stand, connect the adaptor to the product and
then to the mains.
•
The charging indicator will illuminate.
•
The charging indicator will turn off once fully charged.
•
Allow 16 hours for a complete charge.
•
To preserve the life of your batteries, let them run out every 6 months then
recharge for 14-16 hours.
, USB
•
Connect your USB cable to the USB port on your power source.
•
Connect the USB cable to your appliance.
•
The appliance can only be used in corded mode while plugged into a
standard electrical socket.
, Caution: do not turn your trimmer on while charging through a USB port on
your computer.
F INSTRUCTIONS FOR USE
, ATTACHING AND REMOVING GUIDE COMBS
, To Attach
•
With the trimmer blade facing away from you, slide the guide comb on top
of the trimmer blade and click into position.
, To Remove
•
With the trimmer blade facing away from you, carefully push the guide
comb away from the wide head trimmer.
, BEFORE YOU BEGIN
•
Comb facial hair with a fine comb before you start trimming.
•
Hairs should be dry and without any waxes or lotions before using the
groomer.
, To thin and taper the beard/moustache
•
Attach the trimmer blade.
4