Tineco FLOOR ONE S5 STEAM Serie Mode D'emploi page 19

Brush Roller
Remove the brush roller by grabbing the brush
roller tab and pulling out.
Remove hair and debris from the brush roller
chamber and the opening with a tissue or a
damp cloth.
Note:
A spare brush roller is provided with your appliance for convenient replacement.
Using the cleaning tool, remove the hair and
debris wrapped around the roller and rinse with
water. Replace the brush roller back into the
accessory holder, and allow it to dry completely
before reinstalling.
Replace the brush roller by inserting the brush
roller end into the right side of the holder, then
attach the roller tab to the magnetic buckle on
the left side to lock into place.
17