Operation; Preparing For Use - Tineco FLOOR ONE S5 STEAM Serie Mode D'emploi

Operation

Preparing for Use

Press the button and the appliance will start
in Auto mode by default. Press it again to turn
off the appliance. Switch between Auto and
Steaming mode by pressing the
After switching to the Steaming mode, the
number starts to read. After reaching 100, the
nozzle starts to spray steam.
Note:
• Selecting the appropriate mode depending on the actual demand.
• Do not vacuum foamed liquid.
• To vacuum water left on the surface, the appliance will switch off in 3 seconds after power off.
• To avoid the power cord from being caught in the brush roller.
Plug into the AC power outlet.
Tips:
• Please avoid entanglement of the power cord
in the process of releasing.
• The appliance can only be used under
120 voltage.
The appliance will stop working when put uprightly
and start running again when you recline.
* Do not recline more than 142° to protect
button. against water leakage.
Place the appliance on the storage tray
vertically after use for storage.
10
Stop Working Start Again