CASO DESIGN IceCreamer Mode D'emploi page 38

Open the lid of the device and remove the container. Insert the mixer for making of
2.
Symbol Menu
COOLING ONLY
MIXING ONLY
ICE CREAM
YOGHURT
You access the Standby mode once more by pressing the POWER button.
7. Use the rotary knob to set the desired preparation time (varies according to consistency
and amount of ingredients) and start the programme with the START / PAUSE button. You
can interrupt the process at any time by pressing the START / PAUSE button.
8. The display will now show the remaining running time of the selected programme. The
flashing symbol indicates that you have started the programme.
The time is displayed in minutes in the ice, cooling and mixing programme. In the case of
the yoghurt programme it is displayed in hours (from 90 minutes it is the displayed in
minutes again).
9. The ice cream or yoghurt production has finished once the device beeps 3 times and
the display shows "00:00".
10. Check whether the desired level of consistency was reached. If further preparation
time is required, press the POWER button and repeat the sequence from step 5.
ice cream into the container. (The yoghurt function does
not require a mixer). Fill the finished ice cream / yoghurt
mixture into the removable container.
Place the container into the recess of the device.
3.
Close it with the lid by turning it anti-clockwise until it
locks into place.
Plug in the mains plug and "CASO" appears in the
4.
display. The device is in the standby mode.
Press the POWER button. The standard ICE
5.
CREAM menu and the time of 60:00 will appear on the
display.
6. Select the desired programme with the MENU
button:
Function
Cooling
Mixing
Production of ice
cream, sorbet, soft
ice cream, frozen
yogurt
Yoghurt production
Minimum time Maximum time
05:00 60:00 (minutes)
(5 minutes)
05:00 60:00 (minutes)
(5 minutes)
05:00 60:00 (minutes)
(5 minutes)
08 hours 24H (hours)
(8 hours)
38