Getting Started - HP df301 Serie Manuel De L'utilisateur

Getting Started

1. The digital picture frame has basic control buttons on the top of the
frame as illustrated below.
2. Unfold the attached stand to its extended position. Attach the USB
cable to the AC adapter. Connect the mini connector of the cable
to the digital picture frame, and plug the adapter into a wall power
outlet as illustrated below. The picture frame will automatically
power on and begin charging the internal battery. Please allow 2 to
3 hours for a full internal battery charge.
* On some models the SD card slot is located next to the USB slot.
Power
Options Left/Previous
Right/Next
4