Woods BRUSHBULL BB48XE Manuel D'utilisation page 21

UNIVERSAL JOINT REPAIR
1. Yoke
2. Cup and bearing
3. Snap ring
4. Journal cross
Figure 23
. Universal Joint Parts Breakdown
U-Joint Disassembly
1.
Remove external snap rings from yokes in four locations as
shown in Figure 24.
Figure 24.
2.
With snap rings removed, support drive in vise, hold yoke in
hand and tap on yoke to drive cup up out of yoke. See Figure
25.
Figure 25.
MAN1254 (3/16/2018)
Remove Snap Ring
Remove Cups
3.
Clamp cup in vise as shown in Figure 26 and tap on yoke to completely
remove cup from yoke. Repeat Step 2 and Step 3 for opposite cup.
Figure 26.
4.
Place universal cross in vise as shown in Figure 27 and tap on yoke to
remove cup. Repeat Step 3 for final removal. Drive remaining cup out
with a drift and hammer.
Figure 27.
Dealer Service 21
Remove Cups
Remove Cups