Dorel Asia DA1010-6 Mode D'emploi page 9

5-Drawer Chest
DA1010-6
STEP 4
Insert large wood dowels (1) into the left side frame (B) and right side frame (C).
Insert large cam locks (3) into the left side frame (B) and right side frame (C).
Place the top panel (A) on the assembled unit.
Rotate large cam locks (3) on the side panels (B & C) 1/2-turn clockwise to secure the
top panel (A).
Further secure top panel (A) with screws (8) through rails (E & D). Use a Phillips head
screwdriver (not included) to tighten the screws.