Mounting Precautions (For Sharp Dealers And Service Engineers) - Sharp PN-L802B Manuel D'installation

Mounting Precautions (For SHARP dealers and service engineers)

• When installing, removing or moving the monitor, ensure that this is carried out by at least 6 people.
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials
such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.
• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
• Do not use any screw holes other than VESA holes for installation.
nRemoving the temporary stand
Caution
• The temporary stand is only for use with this monitor. Do
not use it for any other devices.
1. Spread a soft thick cloth (such as a blanket) on a
stable level surface on which the entire monitor can
be placed, and place the monitor on it with the screen
facing down.
2. Remove the stand fixing screws and then remove the
stand.
3. Attach the cover (supplied) onto the back of the
monitor.
Secure using 2 cover screws (M4 with washers) (supplied).
Cover screws
(M4 with washers)
(supplied)
If a tray will not be attached, affix the cover seal (supplied)
to the cover.
8
E
Cover screws
(M4 with washers)
(supplied)
nAttaching the Tray
1. Remove the cover from the back of the monitor.
2. Secure the tray mounting bracket.
Secure using 2 tray mounting screws (M5 long) (supplied)
and 1 tray mounting screw (M5 short) (supplied).
(2)
Cover
(1)
Tray mounting Tray mounting screw
bracket (supplied) (M5 short) (supplied)
3. Attach the cover onto the back of the monitor and
secure the tray.
Insert the tray into the tray mounting bracket and secure
with 2 M4 tray mounting screws (supplied).
Screw removed in step 1
Tray
(supplied)
(3)
Tray mounting screws
(M5 long) (supplied)
Screw removed in step 1
M4 tray mounting screws
(supplied)