Specifications; Mounting Precautions (For Sharp Dealers And Service Engineers) - Sharp PN-K322B Manuel D'installation

Model
Power requirement
Operating temperature
Operating humidity
Power consumption
Dimensions (excluding protrusions)
Weight
* When using the monitor in DC19.5 V : 91 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.

Mounting Precautions (For SHARP dealers and service engineers)

• When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials
such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.
• Do not use an impact driver.
• When moving the monitor, be sure to hold it with the unit bottom and the side of unit. Do not hold the LCD panel or corners.
This may cause product damage, failure, or injury.
• Do not use any screw holes other than VESA holes for installation.
8
E

Specifications

PN-K322B
AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter)
41°F to 95°F (5°C to 35°C)
20% to 80% (no condensation)
97 W * (when using the supplied AC adapter)
inch (mm) Monitor only
Approx. 29-17/32(W) x 1-27/64(D) x 17-3/8(H) (750 x 36 x 441)
Monitor on supplied stand
• Monitor screen angle 90° (from horizontal)
Approx. 29-17/32(W) x 15-23/64(D) x 19-27/64(H) (750 x 390 x 493)
• Monitor screen angle 25° (from horizontal)
Approx. 29-17/32(W) x 22-41/64(D) x 8-5/32(H) (750 x 575 x 207)
lbs. (kg) Approx. 19.9 (9.0) (monitor only)
Approx. 35.3 (16.0) (monitor on supplied stand)