JAROLIFT TDRRT01W Mode D'emploi Original page 19

Setting the current time and date
We
Setting the up and down times
We
Su Mo Tu We Th Fr Sa
Su Mo Tu We Th Fr Sa
1. Press the K1 key in the main menu (description see page 7). A clock symbol appe-
ars in the upper left corner and the hour display flashes.
2. Set the time using the UP / DOWN key and confirm the entry using the K1 key.
3. The minute display then flashes. Proceed in the same way as for point 2. The same
applies to setting the day of the week.
Note that the abbreviations stand for the English days of the week (Su=Sunday,
Mo=Monday, Tu=Tuesday, We=Wednesday, Th=Thursday, Fr=Friday, Sa=Saturday).
4. When you have completed your setting, press the STOP button. This ends the pro-
gramming mode and the unit returns to the main menu.
1. In the main view, press the K2 key to enter the driving time menu. An alarm clock
is shown in the upper left corner of the display. You can programme a total of 8 up
and 8 down times.
2. Press the K2 key to cycle through the individual memory locations. (the arrows on
the left-hand side of the display indicate whether it is a up or down time).
The display (-- : --) signals that the memory location is inactive and that this driving
time will not be executed. If there is already a time here, continue at point 4, other-
wise continue at point 3.
3. To activate the deactivated memory location, press the K3 key.
To deactivate the memory location again, press the K3 key repeatedly until the
time display shows (-- : --) again.
4. Now press the K1 key to set the time. The hour display flashes and can be set using
the UP/DOWN key. Press the K1 key again to switch to the minute setting. Here,
too, you can set the minutes using the UP or DOWN key.
5. After pressing the K1 key again, you reach the weekday setting. Here you set the
day(s) of the week for which the time you have just set is valid. Use the UP/DOWN
keys to select the desired setting. setting.
You can choose between:
• single weekday = e.g. "Tu" for Tuesday
• Shortened working week = Mo Tu We Th Fr (Monday to Friday)
• Total working week = Mon Tu We Th Fr Sa (Monday to Saturday)
• Total working week = Mon Tu We Th Fr Sa (Monday to Saturday)
6. When you are satisfied with your settings, press the K2 key to move to the next me-
mory location and start again or press the STOP key to exit programming. To make
changes to the switching time you have just created, press the K1 key.
settings - time - up and down times
19