Daily Use; Bridge Function - Electrolux EQT4520BOG Notice D'utilisation

8 www.electrolux.com
Display
-
+ digit
/
3.5 OptiHeat Control (3 step
Residual heat indicator)

4. DAILY USE

4.1 Activating and deactivating
Touch
deactivate the hob.
4.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• All roasting zones are deactivated.
• You do not set the temperature after
you activate the hob.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• You do not deactivate a roasting zone
or change the temperature. After 90
minutes
deactivates. Before next use, set the
roasting zone to
Description
The roasting zone operates.
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator) : continue cook-
/
ing / keep warm / residual heat.
Lock / The Child Safety Device function operates.
Automatic Switch Off function operates.
WARNING!
/ / There is a risk of
burns from residual heat. The
indicator shows the level of
the residual heat.
WARNING!
Refer to Safety chapters.
for 1 second to activate or
comes on and the hob
.
4.3 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the
control bar until you reach the correct heat
setting.
The display flashes until the roasting zone
reaches the temperature. Then a signal
sounds and the display shows the
temperature.

4.4 Bridge function

This function connects two roasting zones
and they operate as one. This function is
active automatically when you activate the
hob.