Operating Procedures & Maintenance - Hkoenig KB15 Manuel D'utilisation

OPERATING PROCEDURES & MAINTENANCE
1. Cover:
2. Ice scoop.
3. Ice shovel.
4. Control Panel:
A. LCD display window.
1: Current Clock Time
2: No water diplay,When flashing, means no water in the unit, need to pour water
in.
3. Ice-full display, when it display, means the ice basket is full of ice-cube.
4. ON/OFF display, if the unit has been turned off, this symbol will flash;
And if the unit is turned on,
this symbol will always display.
5.Clean symbol: when this symbol flashs, means the unit need to be cleaned.
6.Ice-cube size displaying: Small, Medium, and Large.
7.Timer delay time display.
B. ON/OFF button: To start or stop the unit.
C. SELECT button: To select your desired size of the ice-cube:
small, medium,large, three size of the ice-cube can be selected.
Or to change the time digit during the clock or timer setting program.
D. CLOCK button: To set the displayed time to the correct current time.
E. TIMER button: To set or cancel the timer program to let the unit start to run at your
unit at your desired because of forgetting.
5. Water drain cap:
6. Air Outlet
7.Ice basket
With a transparent window to allow interior visibility.
Easy to use, visible functions and LCD display setting.
desired time or stop the
For draining water from water reservoir.