Loading The Batteries - Olympus Camedia C-4000 ZOOM Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GETTING STARTED (Cont.)
En

Loading the batteries

This camera uses 2 CR-V3 lithium battery packs or 4 AA (R6) NiMH batteries,
NiCd batteries, alkaline batteries or lithium batteries.
Important:
● CR-V3 lithium battery packs cannot be re-charged.
● Do not peel the label on a CR-V3 lithium battery pack.
1
Make sure the camera is turned
off (i.e. the mode dial is set to
OFF).
2
3
Slide the battery compartment
cover in the direction of the
arrow (
and open it (
● Do not use your fingernail, as
this could result in injury.
A
4
12
A
) with your fingertip
B
).
B
When using
CR-V3 lithium
battery packs
5
Close the battery compartment
cover, then press it down (
and slide it in the opposite
direction of the arrow printed
D
on it (
).
● When pressing the battery
compartment cover shut, be
sure to press the center of the
cover, as it may be difficult to
close properly by pressing the
edge.
● Make sure the cover is
completely closed.
D
6
Using an AC power adapter
(optional)
Use an AC adapter designed for
the area where the camera is used.
Consult your nearest Olympus
dealer or Service center for details.
C
)
C

Publicité

Table des Matières
loading

Table des Matières