In-Ceiling Speaker Mode - Sony STR-ZA3000ES Guide D'installation

In-Ceiling Speaker mode

Sony has developed a new special sound mode for CI
installation. This feature will virtually relocate the front and
center in-ceiling speakers down to around the screen. That
way, the customer will hear the actors' voices coming from
the screen instead of the ceiling. This mode also makes
music sound more natural in a room with in-ceiling speakers.
1
Perform Auto Calibration.
2
Select [Setup] - [Audio Setup] - [In-Ceiling
Speaker Mode] - [On] from the home menu.
Notes
• This mode is not available when [Pro Logic II], [Pro Logic IIx],
[Neo:6] or [2ch Analog Direct] is selected, or [Pure Direct] is set to
[On].
• This mode will be disabled in a speaker pattern with front high
speakers.
Tips
• You can select on/off for each input in Input Setup menu.
• You can also select [In-Ceiling Speaker Mode] in [Sound Effects]
from the home menu.
• You can also switch the function on/off by pressing IN-CEILING SP
on the remote control or the receiver.
• To obtain optimal effects in the listening environment, configure
the [Ceiling Speaker Height] setting and perform Auto Calibration.
20
GB