Safety Information - TIE TBT1 Manuel D'utilisation

Note:
1. The pairing mode will only last for 2 minutes.
2. Once turned on, the transmitter TBT1 will connect
automatically with the last-paired device.
3. The transmitter will automatically switch off if no
devices can be connected within 10 minutes.
4. LED indicator instruction
• In standby mode: flashes blue once every
1 second
• In pairing mode: flashes blue quickly
• Connecting mode: flashes blue twice every
2 seconds
5. Clear the pairing list: turn the Bluetooth transmitter
TBT1 off, then press and hold the MFB button
for about 12 seconds until the LED flashes red
for 1 second and then flashes blue for 1 second.
Afterwards, the transmitter enters into pairing mode
automatically.

SAFETY INFORMATION

• The battery used in this device may cause a fire or
present a chemical explosion hazard if mishandled.
• To avoid damage or malfunction of the device, do
not drop the device from great high places.
• Keep the device away from humidity, water and
any other liquid. If the device is exposed to water,
moisture and other liquids, do not operate it to
avoid any electrical shock, explosion and damage
to the device or yourself.
6