TIE TBT1 Manuel D'utilisation page 6

Switch on: Press and hold the MFB button for about 2
seconds until the LED flashes blue.
Switching off: Press and hold the MFB button for
about 2 seconds until the LED flashes red and then
goes out.
TRANSMITTER, PAIRING WITH A BLUETOOTH DEVICE
After connecting the transmitter to a Bluetooth stereo
device, you can enjoy music without wire restriction.
Before pairing, please make sure that your Bluetooth
device supports the Bluetooth profile A2DP.
Pairing procedure
1. Please make sure the transmitter is turned off.
2. Keep the transmitter TBT1 and your Bluetooth
headphone within 1 meter.
3. Press and hold the MFB key for approx. 4 seconds
until the LED flashes blue quickly. The Bluetooth
transmitter then enters into pairing mode.
4. Set your Bluetooth headphone into pairing mode.
5. The transmitter TBT1 will automatically search, pair
and connect with your Bluetooth headphone.
6. After successful pairing, the LED flashes blue twice
every 2 seconds. Now you can connect the trans-
mitter TBT1 to your TV, computer or music player
via the included 3.5mm audiocable to enjoy your
stereo music wirelessly.
5