TIE TBT1 Manuel D'utilisation page 4

Switch on: Press and hold the MFB key for approx. 2
seconds until the LED flashes blue. Beeps will sound
during this process.
Switching off: Press and hold the MFB key for
approx. 3 seconds until the LED flashes red and then
goes out. Beeps sound when you do this.
RECEIVER
Pairing with a smartphone
1. Ensure the receiver is turned off.
2. The TBT1 and your smartphone should not be
more than 1 meter apart.
3. Press and hold the MFB button for about 6
seconds until the LED flashes in red and blue
alternatively and fast. The Bluetooth adapter enters
into pairing mode.
4. Activate the Bluetooth function and search the
adapter within your smartphone.
5. Select „ TBT1" from the device list, follow the steps
and enter pass code 0000 if requested to pair.
6. Connect the TBT1 with your smartphone.
7. After the successful pairing, the LED will flash blue
three times every 2 seconds.
Note:
1. Please make sure your smartphone's Bluetooth
function is activated before pairing.
3