Hantech 4619277 Mode D'emploi page 14

Notes：1）Keep the drainage cover and the water plug properly.
2）During drainage, the body can be tilted slightly backwards.
3）If the water container cannot hold all the water, before the water container is
full, stuff the water outlet
with the water plug as soon as possible to prevent water from flowing to the
floor or the carpet.
4）When the water is discharged, stuff the water plug, and tighten the drainage
cover
2．Continuous drainage (Optional) (only applicable to dehumidifying mode), as shown in
figure:
1) Unscrew the drainage cover, and unplug the water plug.
2) Set the drainage pipe into the water outlet.
3) Connect the drainage pipe to the bucket.
VII. Maintenance
Cleaning: before cleaning and maintenance, turn off the machine and unplug the plug.
1．Clean the surface
Clean with surface of machine with a wet soft cloth. Don't use chemicals, such as
benzene, alcohol, gasoline, etc; otherwise, the surface of the air conditioning will be
EN
12