Frost Protection; Transport - Kärcher ProHD 200 Mode D'emploi

Frost protection

ATTENTION
Frost will destroy the not completely water
drained device.
Store the appliance in a frost free area.
If you cannot store it in a frost-free
place:
 Drain water.
 Pump in conventional frost protection
agents through the appliance.
Note:
Use normal glycol-based anti-freezing
agents for automobiles.
Observe handling instructions of the anti-
freeze agent manufacturer.
 Operate device for max. 1 minute until
the pump and conduits are empty.

Transport

CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
ATTENTION
Protect the trigger from damage during
transport.
 Hold the appliance at the carrying han-
dle and the recessed grip for carrying it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Appliances with push handle and
wheels:
 For transport over longer distances, pull
out the push handle to the end position
and drag the appliance behind you
holding the push handle.
 In order to climb stairs, pull the appli-
ance up step by step. The skids protect
the casing from damage.
Appliances with carrying belt:
CAUTION
Risk of injury due to machine dropping.
Check the carrying belt for damage prior to
using it.
 Put the carrying belt over your shoulder
and carry the appliance.
16
Holder for surface cleaner
 Attach the connecting piece of the sur-
face cleaner to the holder on the high-
pressure cleaner.
 Screw union nut.
Note:
With the ProHD 200 the holder can only be
used for a nozzle with screw connection.
Transport by crane
DANGER
Risk of injury due to machine dropping. Do
not attach the lifting device to the carrying
belt of the appliance.
 Attach the lifting device to the carrying
handle of the appliance.
Safety information about cranes
DANGER
Risk of injury due to machine dropping.
– Adhere to the local accident prevention
guidelines and safety notes.
– Check the carrying handle for damage
prior to every transportation by crane.
– Check the lifting unit for damage prior to
each transport by crane.
– Only lift the appliance using the carrying
handle.
– Do not use stop chains.
– Protect the lifting device from inadvert-
ent load release.
– Remove spray lance with trigger gun,
nozzles, surface cleaner and other
loose objects prior to transportation by
crane.
– Do not transport any articles on the ap-
pliance during the lifting process.
– 5
EN