Sony IC Recorder ICD-P520 Guide De Démarrage Rapide page 6

1
Display the clock setting display.

Press MENU/DISPLAY for more than
1 second until "MODE" appears in the
display window.
The unit enters the menu mode.

Press – 
DATE".


Press PLAY/STOP.
The year digits will flash.
2
Set the date.


Press –
digits of the year.

Press  PLAY/STOP.
The month digits will flash.

Set the month and day in sequence,
then press 
The hour digits will flash.
Tip

To set the date to Year 2007, display "07Y".

GB
or  + to display "SET

or + to select the
PLAY/STOP.
3
Set the time.

Press –  or
digits of the hour.

Press  PLAY/STOP.
The minute digits will flash.

Set the minute.

Press  PLAY/STOP at the time
signal.
The display will return to "SET DATE".

Press  STOP to exit from the menu
mode.
If the unit is left unused for more
than 3 seconds in the stop mode, the
display will show the current time.
Tip

This unit does not have a power on/off switch.
The display is shown at all times.
 + to select the