Important Notices; Gb User Instructions Cooler And Freezer - Ezetil EZC 25 Mode D'emploi

Dear customer,
You have chosen to purchase an EZetil compressor cooler box. We thank you for this purchase and hope that your experiences
with this quality product will be pleasant ones. The cooler is an ideal companion for keeping your beverages, refreshments and food
refrigerated while on trips, picnics, camping excursions and shopping trips.

Important notices:

Before first-time use of this unit, you should carefully read these user instructions so that you can then connect and operate your
cooler accordingly.
Please keep these user instructions so that you can reference them later on.
This unit may only be connected to the power sources intended for it!
Therefore make sure that the voltage on the cooler's rating plate matches the voltage of the power source before making the connec-
tion. When making connections to boat or yacht power systems, be sure that the connection is properly protected (e.g. fuse)!
Item No
Capacity in litres
25
Supply voltage (V)
DC 12/24 DC 12/24 DC 12/24/AC100-240
Delivery complement
• Compressor cooler
• 12 V / 24 V connection cable
• 230 V connection cable (types 777980, 778080, 778780 and 778880 only)
• User instructions
1. Operation
All operating elements necessary to use this unit are gathered together into a single operator panel in the upper part of the cooler.
A
A Main switch for turning the unit on and off
B Selector switch for full cooling performance at maximum power consumption ("Boost") or energy-efficient operation at reduced
cooling performance ("Eco")
C Pre-select button for setting the desired cooling temperature or raising the temperature setting in increments of 1° C.
D Digital display of the desired/actual temperature
E Pre-select button for setting the desired cooling temperature or lowering the temperature setting in increments of 1° C.
F Setting for the sensitivity of the built-in battery monitor (see table on Page 8)
"Hi" means a high shut-off voltage, see table
"Med" means a medium shut-off voltage, see table
"Low" means a low shut-off voltage, see table
After the cooler has been set up, connected and switched on, the digital display will indicate the measured temperature now in the
cooler (e.g. 20°). You can now use the pre-select buttons to set the desired temperature in increments of 1° by pressing the minus
or plus button repeatedly until the digital display shows the desired cooler temperature (e.g. -12°). If you now release the pressed
button, the pre-set value will be confirmed by blinking the display. Thereafter, the display will again show the actual temperature inside
the cooler and the box will refrigerate the cool-space until the desired temperature has been reached. The cool-space has zones with
slightly differing temperatures. The display always reflects an approximate average temperature.
Operate the unit in boost mode for particularly low pre-select temperatures (under –12° C) or to rapidly cool your refrigerated items.
This will increase the cooling performance of the unit.
By simultaneously pressing the "+" and "-" buttons, the temperature display can be switched between °C and °F.
Memory function: The cooler's electronics stores the last-set cooling temperature. If the cooler is switched off and then at some later
time switched on again (without setting a new temperature), the box will "remember" the last preset temperature and automatically
use this setting.
18265_EZetil_KompressorBedienAra6 18265_EZetil_KompressorBedienAra6
GB
USER INSTRUCTIONS Cooler and Freezer
777850 777950 777980
35 35
B C
6 6
778050 778080 778780
45 45 60
DC 12/24 DC 12/24/AC100-240 DC 12/24/AC100-240
D
– 6 –
778880
80
DC 12/24/AC100-240
E F
10.03.2008 10.03.2008 9:30:18 Uhr 9:30:18 Uhr