Key Refrigerator Dimensions; Assemble The Enclosure For The Refrigerator - Norcold Nx64 Manuel D'installation

Key Refrigerator Dimensions

These key refrigerator dimensions are for your
reference as necessary (See Art02384).
Refrigerator cabinet width w/o trim - 23.47 in. max. ... 1
Refrigerator width overall w/ trim - 24.6 in. ................. 2
Refrigerator cabinet to side trim - 0.80 in. .................. 3
Refrigerator cabinet height w/o trim............................ 4
NX6 models - 52.85 in. max.
NX8 models - 59.85 in. max.
Refrigerator height overall w/ trim............................... 5
NX6 models - 54.5 in.
NX8 models - 61.5 in.
Refrigerator cabinet to top/bottom trim - 0.93 in. ........ 6
Enclosure wall to hinges - 1.22 in. .............................. 7
Refrigerator cabinet to center of handles ................... 8
NX6 models - 32.5 in.
NX8 models - 39.5 in.
Assemble the Enclosure for the
Refrigerator
1. Make sure the enclosure is 59.88 - 60.01 inches
high for NX8 models or 52.88 - 53.01 inches high
for NX6 models x 23.50 - 23.63 inches wide x 24.00
inches deep.
2. Make sure the floor is solid and level.
- The floor must be metal or a wood panel and
extend the full width and depth of the enclosure.
- The floor must be able to support the weight of the refrigerator and its contents.
3. Make sure there are no adjacent heat sources such as a furnace vent, a hot water heater vent, etc.
4. If there is more than 1/2 inch between either side of the refrigerator and the inside of the enclosure:
- Fill the space with fiberglass insulation or add a baffle to eliminate the excess clearance.
- Make sure that the rear of the batt-type insulation is between 18 - 19 inches from the face of the enclosure.
- Securely attach the batt-type insulation to the enclosure so that it remains in this position during refrigerator installation, if it
becomes wet, and in windy conditions.
1
2
Art02384
3
7
5
8
Installation Manual 5
6
4