Selecting A Device To Control; Selecting The Input Source - HP MediaSmart SL4778N Manuel De L'utilisateur

Selecting a Device to
Control
Perform these steps to select and operate the TV, or
another device after programming a home
entertainment device into your remote control for the
devices AUD, STB, or AUX.
1
If necessary, press the Device button to light the
indicator for the device you want to control.
On/Off
TV AUD STB AUX
Device
To operate the TV, point the remote control at
■
the TV remote control sensor window near the
lower-right corner of the front of the TV
display.
To operate another device, point the remote
■
control at the device remote control sensor
window.
2
If necessary, press the Power button to turn on the
device.
Device light Description
TV Remote control controls your TV
(already programmed).
AUD Remote control controls your
audio receiver (external sound
system). No default
manufacturer.
STB Remote control controls your
set-top box (for digital satellite,
cable, or personal video
recorder [PVR]). Motorola is the
default STB.
AUX Remote control controls your
DVD or other entertainment
device. Panasonic DVD is the
default AUX.
3
Operate the TV or device using the remote control.
For the TV, see the remaining topics in this
■
section.
For a device other
■
than the TV, use the
device buttons
supported by the
device. Press the
Record (Rec),
Rewind, Play,
Pause,
Fast-Forward (FF), and Stop buttons to operate
a DVD or other connected device. The
Previous and Next buttons work with DVD
players. The Live TV button works with PVR
and STB devices.
For information on how to program a device into your
remote control, see "Programming the device code" on
page 44.
For a list of the buttons available to operate a
programmed device, see "Operating a DVD Player or
Other Device" on page 40.
Selecting the Input
Source
1
Press the Source button on the remote control, or on
the TV, to open the list of input sources.
2
Press the Up or Down Arrow button on the
remote control, or press the Channel buttons
on the TV, to select the input source to view.
3
Press OK on the remote control, or press Select on
the TV.
Or
Press the Source button again to close the list of
input sources without changing the source.
Rec
Live TV
35
Operating the TV