Dimensions; Intended Use - Desoutter Industrial Tools ELB2.5-1250-P Mode D'emploi

(French) Cet équipement est conforme aux limites d'exposi-
tions de la CNR102 applicables pour un environnement non
contrôlé aux conditions suivantes:
1) Cet émetteur ne doit pas être co-localisé ou opérer en con-
jonction avec toute autre antenne ou émetteur.
Conformity to North American standards
3008099
Safety
DO NOT DISCARD - GIVE TO USER
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the prod-
uct cease to be legible or become detached, replace with-
out delay.
• The product must only be installed, operated and ser-
viced by qualified personnel in an industrial environ-
ment.

Intended use

This product is designed for installing and removing threaded
fasteners in wood, metal or plastic. No other use permitted.
For professional use only.
Use the following Desoutter battery packs only.
• Battery pack 18 V 2.5 Ah, part number 6158132660
• Battery pack 36 V 2.5 Ah, part number 6158132670
Battery packs must be charged with the Desoutter battery
pack charger (6158132700) only.
For complete instructions, refer to the battery pack charger
Safety Instructions (6159925310) and Product Instructions
available in several languages at
www.desouttertools.com/resource-centre
04/2022
Listed
Conforms to UL 62841-1 and
UL 62841-2-2
Certified to CSA C22.2 No.
62841-1 and CSA C22.2 No.
62841-2-2
https://
Product Specific Instructions
Product description
1 Output drive
2 Trigger
3 Reporting LEDs
4 Reverse button
5 Battery footprint
6 Identification ring
ELC models
7 Blue LED

Dimensions

A
B
C
General Installation Safety
Refer installation to qualified personnel only.
Hang the tool securely, by for example using a balancer.
When using a suspension yoke, check that it is in good con-
dition and correctly fastened.
7 / 208
Safety Information
mm in.
215 8.46
178 7.00
63 2.48