Geneva Touring/xS Mode D'emploi page 4

6
QUICK START GUIDE
CONNECTED
PAIRING
CONNECTING TO DEVICE
BATTERY LOW
BATTERY CHARGING
(switches automatically when cable is plugged)
CONNECTED
BATTERY LOW
BATTERY CHARGING
Connecting to TOURING/XS using Bluetooth
When you start TOURING/XS it automatically goes into Bluetooth pairing mode.
Please select "TOURING/XS" in your device bluetooth settings menu for pairing. TOURING/XS is now ready to play.
If your device is already paired with TOURING/XS, it will automatically reconnect when you start TOURING/XS.
If TOURING/XS is already paired with a device and you want to pair another device, press
mode.
Select "TOURING/XS" in your device bluetooth settings menu.
Connecting to TOURING/XS using 3.5 mm line-in connector
When you connect a cable to the line in connector on the backside of the unit, TOURING/XS automatically switches to line-in mode and
Bluetooth is disabled. Just unplug the cable to go into Bluetooth mode.
Charging the TOURING/XS battery.
TOURING/XS has a built-in rechargeable battery. When the battery is low, the LED on top will pulse fast.
To charge TOURING/XS, simply connect the power cord included with the product.
Charging will end automatically when the battery is completed charged.
If the product is damaged and needs repair, please contact your dealer. Visit www.genevalab.com to find a dealer in your area.
See specific terms for your country at www.genevalab.com. Visit our support page at www.genevalab.com/support
button on the back side to go into pairing
7