Leica Geosystems DX10 Mode D'emploi page 4

Introduction
Purchase
Product
identification
Symbols
Trademarks
2
Congratulations on the purchase of a DX10 instrument.
This manual contains important safety directions as well as instructions
for setting up the product and operating it. Refer to "4 Safety Directions"
for further information.
Read carefully through the User Manual before you switch on the
product.
The type and the serial number of your product are indicated on the type
plate.
Enter the type and serial number in your manual and always refer to this
information when you need to contact your agency or Leica Geosystems
authorized service workshop.
Type:
Serial No.:
The symbols used in this manual have the following meanings:
Type Description
Danger Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
Warning
Indicates a potentially hazardous situation or an
unintended use which, if not avoided, could result in
death or serious injury.
Caution
Indicates a potentially hazardous situation or an
unintended use which, if not avoided, may result in
minor or moderate injury and/or appreciable
material, financial and environmental damage.
Important paragraphs which must be adhered to in
practice as they enable the product to be used in a
technically correct and efficient manner.
• Windows, Windows CE, Windows Mobile, ActiveSync, Embedded
Visual C++ version 4.0, Visual Studio 2005 and VISTA are a registered
trademark of Microsoft Corporation
• Bluetooth is a registered trademark of Bluetooth SIG, Inc
All other trademarks are the property of their respective owners.
DX10
_______________
_______________
Introduction