Philips 9000 Serie Mode D'emploi page 29

Troubleshooting
Shaver
Problem
The appliance
does not work
when I press the
on/off button.
- For the appliance to be used correctly, the user
should strictly adhere to all instructions
included in the user manual and should abstain
from any actions or uses that are described as
undesired or which are warned against in the
user manual.
- These warranty restrictions do not affect your
statutory rights.
This chapter summarizes the most common
problems you could encounter with the appliance.
If you are unable to solve the problem with the
information below, visit www.philips.com/support
for a list of frequently asked questions or contact
the Consumer Care Center in your country.
Possible cause
The appliance is still
placed on the Qi
charging pad.
The rechargeable
battery is empty.
The travel lock is
activated.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
English
Solution
Remove the appliance
from the Qi charging pad
and press the on/off
button to switch on the
appliance.
Recharge the battery
(see 'Charging').
Press the on/off button
for 3 seconds to
deactivate the travel lock.
Clean the shaving heads
thoroughly or replace
them.
29