Bosch AXT 2200 HP Mode D'emploi page 9

EURO • Printed in Germany • BA F016L69647 • AXT 2200 HP / AXT 2500 HP • GB • OSW 05/99
AXT 2200/2500 HP - Buch Seite 11 Mittwoch, 14. Juni 2000 8:09 08
For your Safety
Working safely with this machine is possi-
a
ble only when the operating and safety in-
formation are read completely and the in-
structions contained therein are strictly
followed. In addition, the general safety in-
structions in the enclosed booklet must be
followed. Before using for the first time,
ask for a practical demonstration.
Persons under 16 years of age are not permit-
ted to operate this machine. Store the ma-
chine and its accessories in a place which it is
not accessible for children. The machine
should not be left on unattended.
Wear safety glasses, protective gloves, sturdy
b
shoes and long pants.
If the cable is damaged or cut through while
c
working, do not touch the cable but immedi-
ately pull the mains plug. Never use the ma-
chine with a damaged cable.
Take care when the spiral cutting knives are in
d
operation.
Do not expose the machine to rain. Do not ex-
e
pose the machine to rain. Only store the ma-
chine in a dry place.
During operation, do not reach into the feed
opening 6 or the ejection chute 10. The ma-
chine runs on for approx. 5 seconds after being
switched off. During operation, no other persons
or animals should be within a radius of 3 m.
During pauses in the work, when not in use or
f
during work on the machine itself (e.g., chang-
ing of the working tools, repairs, cleaning, ad-
justment), pull the mains plug.
The machine may be connected only to a
properly earthed power system. The socket
and extension cable must have a functional
protective conductor.
Connect machines that are used in the open
via a residual current circuit breaker with a trig-
gering current of 30 mA maximum. Use only
extension cables that are intended for outdoor
use and are protected against splash water.
Do not driver over, crush or stretch the cable.
Bosch can assure flawless functioning of the
machine only when original accessories are
used.
Tool Specifications
GB
Silent shredder AXT 2200 HP AXT 2500 HP
Part number
Rated power
Operating mode S 6 4/6 min
Rotational speed 40 RPM
Capacity max.
Branch diameter max. 35 mm
Collecting bag
Weight
Safety class
1) The S 6 operating mode (40 %) indicates a load profile of
4 min load and 6 min idle time. For practical application,
continuous operation is permitted.
2) Depending on the hardness of the wood.
Noise/Vibration Information
Measured values determined according to
RAL UZ 54.
Typically the A-weighted noise levels of the tool
are: Sound pressure level: 84 dB (A).
Sound power level is lower than 91 dB (A).
Operating Controls
1 On/Off switch
2 Rotational direction switch
3 Appliance plug*
4 Ventilation slots
5 Undercarriage
6 Feed opening
7 Hooks for collecting sack
8 Adjustment knob
9 Allen key
10 Ejection chute
11 Collecting sack/Cover*
* Country-specific connection
Not all of the accessories illustrated or described are
included as standard delivery.
Use as Intended
This shredder is designed for compostible cutting
of fibrous and woody garden waste.
0 600 852 0.. 0 600 852 1..
2200 W 2500 W
1)
S 6 4/6 min
40 RPM
2) 2)
140 kg/h 150 kg/h
2)
max. 40 mm
Includet Includet
approx. 25 kg approx. 26 kg
I / I /
œ œ
1)
2)
11