Fein GIR Mode D'emploi page 12

OBJ_BUCH-0000000306-001.book Page 12 Tuesday, April 24, 2018 10:38 AM
en
12
Open cover (17) and side cover (5) and remove the metal
dust.
The metal dust must be sufficiently cooled and may only
be disposed of in suitable containers.
Mount cover (17) and side cover (5) again.
Cleaning the exterior of the machine with compressed
air.
If required, you can change the following parts yourself:
Grinding belt, contact roller (18), spark guard (2)
Warranty and liability.
The warranty for the product is valid in accordance with
the legal regulations in the country where it is marketed.
In addition, FEIN also provides a guarantee in accordance
with the FEIN manufacturer's warranty declaration.
The delivery scope of your machine may include only a
part of the accessories described or shown in this instruc-
tion manual.
Declaration of conformity.
FEIN declares itself solely responsible for this product
conforming with the relevant provisions given on the last
page of this Instruction Manual.
Technical documents at: C. & E. Fein GmbH,
C-D1_IA, D-73529 Schwäbisch Gmünd
Environmental protection, disposal.
Packaging, worn out machines and accessories should be
sorted for environment-friendly recycling.