F.F. Group EHT 55/650 PLUS Notice Originale page 49

EHT 55/650 PLUS | EHT 61/750 PRO
Problem
Hedgecutter does
not operate
Hedgecutter oper-
ates intermittently
Motor runs but
blades remain sta-
tionary
Cutting blade hot
Excessive vibrations/
noise
ENGLISH
TROUBLESHOOTING
Possible cause
Power turned off
Mains socket faulty
Inbuilt supply cable damaged
Separate extension cable
damaged
Fuse faulty/blown
Inbuilt supply cable damaged
Separate extension cable
damaged
Internal wiring of machine
damaged
On/Off switch defective
Internal fault
Cutting blade blunt
Cutting blade has dents
Too much friction, due to lack of
lubricant
Machine defective
Solution
Turn power on
Use another socket
Inspect supply cable carefully, contact
Service Agent for replacement
Inspect extension cable, replace if damaged
Replace fuse
Inspect supply cable carefully, contact
Service Agent for replacement
Inspect extension cable, replace if damaged
Contact Service Agent
Contact Service Agent
Contact Service Agent
Have blade sharpened
Have blade inspected/overhauled
Apply lubricant spray
Contact Service Agent
English | 49
www.ffgroup-tools.com