Ego Power+ LB7650E Notice D'origine page 5

SPECIFICATIONS
Voltage
Maximum air volume at nozzle 1300 m
Maximum air velocity
Maximum blowing force
Approximate run time (with
EGO BA2800T 56V Battery
5.0Ah)
Recommended Operating
Temperature
Recommended Storage
Temperature
Weight (without battery pack)
Measured sound power
level L
WA
Sound pressure level at
operator's ear L
PA
Guaranteed sound power level
L (measured according to
WA
2000/14/EC)
Valuation of vibration a
h
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should
wear gloves and ear protectors in the actual conditions
of use.
DESCRIPTION
KNOW YOUR BLOWER (FIG. A1)
1. Speed/Lock-On Dial
56V
/h
3
74 m/s (without
tapered nozzle)
87 m/s (with tapered
nozzle)
26 N
150 min (Low speed)
25 min (High speed)
15 min (Boost mode)
-15°C - 40°C
-20°C - 70°C
2.1 kg
98.52 dB(A)
K=0.85 dB(A)
82.8 dB(A)
K=2.5 dB(A)
99 dB(A)
0.758 m/s
2
K=1.5 m/s
2
56 VOLT LITHIUM-ION CORDLESS BLOWER – LB7650E
2. Boost Button
3. Air-Speed Trigger
4. Battery-Release Button
5. Latch
6. Electric Contacts
7. Ejection Mechanism
8. Air Intake
9. Base
10. Tube-Release Button
11. Blower Tube
12. Tapered Nozzle
13. Spread Nozzle
PACKING LIST (FIG. A1)
RECOMMENDED ACCESSORIES
PART NAME
Gutter Cleaning Attachment
Shoulder Strap
ASSEMBLY
APPLICATION
You may use this product for the purposes listed below:
◾
Clearing hard surfaces such as driveways and
walkways.
◾
Keeping decks and driveways free from leaves and
pine needles.
NOTICE:
The tool is to be used only for its prescribed
purpose. Any other use is deemed to be a case of misuse.
ASSEMBLING/REMOVING THE BLOWER TUBE
◾
To Assemble (Fig. B1 & B2 )
Align the groove and push the tube onto the blower
housing until you hear a "click".
◾
To Remove (Fig. B3)
Press the tube-release button and remove the tube.
ASSEMBLING/REMOVING THE BLOWER TAPERED/
SPREAD NOZZLE
◾
To Assemble (Fig. C1 & C2)
Align the groove in the tapered nozzle with the tube
knob and push the nozzle onto the tube until it snaps
into place.
MODEL NUMBER
AGC1000
AP1500
5
EN