Daikin BRC1E72 Mode D'emploi page 15

Operation
1
Dry
Return Setting
2
On/Off
nu
K
3
4
On/Off
nu
K
English
● Press Mode button several times until
the Dry mode is selected.
* The dry mode may not be available depending on the type of
indoor unit.
● Press On/Off button.
The Operation lamp (green) will
illuminate and the system will start
operating.
* In Dry mode, the system maintains automatic temperature and
fan speed control. Therefore, temperature setpoint or fan speed
settings are not available while the indoor unit is in the Dry
mode.
● Adjust Airfl ow Direction from the main menu
.
(see page 23)
* If the connected indoor unit model does not include oscillating
louvers this function will not be available.
● When the On/Off button is pressed
again, the system will stop operating
and the operation lamp will turn off.
Note
● To prevent water damage or system failure, do not immediately
remove power from the indoor unit following system operation.
Wait at least fi ve minutes for the condensate pump to fi nish
draining residual water from the unit.
13