axhess PROFI POWER 2970003 Guide Rapide page 4

2 Way of supply
Qty. Description
1 Window heating pad, heatable, with 12 V connection cable and
12 V plug, incl. suction cups
2 Spare fuse (fuse in 12 V plug)
GB
1 Manual
3 Intended use
The window heating pad is meant for temporary attachment on the windows of a vehicle, developed for
heating them up from time to time. This is therefore the only purpose for which this product may be used
in the vehicle.
Intentionally, the window heating pad is meant for defrosting vehicle windows during winter times. The
product may only be attached and used on the windows inside the vehicle.
Make sure the Heating pad get mounted even with it's dark side, the heating side, onto the screen.
Do not use on defective Windscreen! Got a windscreen already rifts, stone chips, or was the wind-
screen already repaired, don´t use the heating pad on those windscreens! Solely usable on intact
carglass windscreen. Don´t use and don´t put on plastic materials. Melding and deformation potential!
4 Technical features
Input 12 V DC
Return 120 W (10 A, 12 V)
Max. temperature 60 °C +/- 5 °C
Temperature control integrated thermostat
Heating technology Carbon fibre
Advantages quick heating, reliable, very low power consumption compared tot equal
product
Length connection cable ca. 180 cm incl. 12 V plug
Dimension ca. 40 x 100 cm (W x L)
Attachment with suction cups
Weight unpacked product ca. 0,600 kg
5 Connecting the window heating pad
Plug the 12 V plug into of the device into a 12 V power source (cigarette lighter or onboard contact).
The red warning light of the 12 V plug lightens up. The window heating pad is switched on as long as it is
connected to a 12 V power source and is being provided with 12 V DC power. Reckon with the fact many
vehicles need to be sparked to provide the board contacts with power/voltage. Use the heating function
exclusively when the engine is running, but not while driving. An integrated thermocontroller protects the
product against over-heating. However, the window heating pad may not be used over 60 minutes without
interruption. In most cases however the desired effect is being reached in a significant shorter period of
time.
Make sure, when using the window heating pad the battery of the vehicle is not being overloaded –
gets discharged – to make sure the vehicle is still able to start, especially during winter!
That's why we recommend when using this window heating pad:
A) to use it in combination with a 12 V time switch to abolish the possible discharging of the
vehicle battery.
B) to use, in stead of the on-board contact, a separate 12 V power source, like for example a
Power Station. By doing so, the battery of the vehicle remains spared, but you still enjoy the
comfort of the window heating pad.
(more about the time switch and Power Stations on www.axhess.com)
If you're not using an additional 12 V time switch or a separate 12 V power source, never leave the the win-
dow heating pad with switched on heating function unguarded.
8
pp_2970003_Heizpad_Manual_1293_k3.indd 8-9
6 Maintenance and cleansing
Clean the window heating pad, when necessary, with a slightly moisty cloth or sponge. Dry off the
cleaned spots with a towel or some other suitable instrument. Do not use the heating function of the
cushion when the cushion is not completely dry yet.
Exclusively use soap and water for cleaning, no agressive or abrasive, chemical cleaning liquids!
Storage
When storing, do not fold or bow the window heating pad. Roll up the screen. Keep in this position by
using a rubber strap or some other proper, flexible material. Store the product on a dry, well ventilated and
free of dust location, far out of reach of children.
7 Error discarding
Warning light of the 12 V plug doesn't light up No current, possibly activate sparking.
The fuse of the 12 V plug has blow Change fuse. Plug in the 12 V plug correct.
Window heating pad doesn't get warm Like described above, cq cable has broken. Check
the connection to the power source. Also check
the charging status (batterie or Power Station) and
charge if necessary.
8 Removal
The packaging of the product is 100 % recyclable and to be used again. Deposit the packaging at the
appropriate domestic refuse.
If one day the window heating pad should be taken out of operation, leave it at one of the appropriate
collecting points for electronic devices. Do NOT add to your domestic refuse!
Act environmentally aware, protect our environment.
GB
9
09.11.2009 16:51:47