General Overview - Guest CHARGEPRO 1.5 Manuel Du Propriétaire Et Guide D'installation

SAFETY INSTRUCTIONS
9
Portable Use with DC Clamps for Out-of-Vehicle/Boat Battery Maintaining
Safety Precautions
17. FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE VEHICLE. A SPARK NEAR
BATTERY MAY CAUSE BATTERY EXPLOSION. TO REDUCE RISK OF A SPARK
NEAR A BATTERY:
CAUTION
a. Check polarity of battery posts. POSITIVE (POS, P, +) battery post usually has a larger
diameter than the NEGATIVE (NEG, N, –) post.
b. Connect the RED POSITIVE (POS, P, +) cable clamp to the POSITIVE (POS, P, +)
post of battery.
c. Connect the BLACK NEGATIVE (NEG, N, –) ChargePro
(NEG, N, –) post of battery.
d. Do not face battery directly when making final connection.
e. Connect the ChargePro ™ 1.5 AC supply cord to a properly grounded fault protected electric outlet.
f. When disconnecting the ChargePro ™
procedure and break first connection while standing as far away from the battery as practical.
™ 1.5 cable clamp to the NEGATIVE
1.5, always do so in reverse sequence of connecting
Standard Product Features
Dual use design, easily configures for on-board or portable use.
1. 2.
1. Expanded LED display for Power, Charging and Auto Maintain Status
2. Quick connect DC clamp and ring terminal cable assemblies.
3. Concealed mounting holes
4. Die cut foam resting pad for portable use.

GENERAL OVERVIEW

3. 4.
10