Guest CHARGEPRO 1.5 Manuel Du Propriétaire Et Guide D'installation page 4

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SAFETY INSTRUCTIONS
3
Important Safety Instructions
5. Extension cords:
a. Pins on the plug of the extension cord are the same number, size and shape as those
on the plug of the ChargePro
1.5.
b. Use only a properly wired extension cord in good electrical condition.
c. Use an industrial grade / heavy duty UL or CSA approved and grounded extension cord.
Check extension cord before use for damage, bent prongs, and cuts. Replace if damaged.
Always make your extension cord connection on the charger side first. After connecting
the extension cord to the ChargePro
into a nearby 120 VAC GFCI protected (Ground Fault Circuit Interrupt) outlet.
Below are manufacturer recommendations for the right size UL or CSA Approved grounded
extension cord.
i. Up to 50 feet in length use a 3 conductor 18 AWG extension cord.
ii. 50 to 100 feet in length use a 3 conductor 16 AWG extension cord.
iii. 100 to 150 feet in length use a 3 conductor 14 AWG extension cord.
6. Do not operate the ChargePro
1.5 if any protective AC and DC cable insulation, DC fuse
holders or ring terminals have been damaged or compromised. Contact Guest
to return the ChargePro
1.5 for service and repair.
7. Do not operate the ChargePro
1.5 if it has received a sharp blow, direct hit of force, been
dropped or otherwise damaged in any way. Contact Guest
ChargePro
1.5 for service and repair.
8. Do not disassemble the ChargePro
1.5. Incorrect reassembly may result in a risk of electric
shock or fire. If service or repair is required please call Guest
800-824-0524 between 8:30am-5pm (EST) Monday through Friday, or via www.chargepro.com.
Unauthorized attempts to service, repair or modify may result in a risk of electrical shock,
fire or explosion and will void warranty.
9. To reduce risk of electric shock, unplug the ChargePro
any maintenance or cleaning.
10.Do not expose AC power cord connection to rain or snow.
1.5 proceed to plug the extension cord
®
immediately
®
immediately to return the
®
customer service at
1.5 from outlet before attempting
Important Safety Instructions
11. GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS
a. The ChargePro
1.5 should be grounded to reduce risk of electric shock. ChargePro
is equipped with an electric cord having in equipment-grounding conductor and a grounding
plug. The plug must be plugged into a 120 VAC GFCI protected (Ground Fault Circuit
Interrupt) outlet that is properly installed and grounded in accordance with all local codes
and ordinances.
DANGER
Never alter AC cord or plug provided - If it will not fit outlet, have proper outlet installed by a qualified
electrician. Improper connection can result in a risk of an electric shock.
b. The ChargePro
1.5 is for use on a nominal 120-volt circuit, and has a grounding plug
that looks like the plug illustrated in figure A. A temporary adapter, which looks like the
adapter illustrated in figure B may be used to connect this plug to a two-pole receptacle
as shown in figure B if a properly grounded outlet is not available. The temporary
adapter should be used only until a properly grounded GFCI protected outlet
can be installed by a qualified electrician.
DANGER
Before using adapter as illustrated, be certain that center screw of outlet plate is grounded.
The green-colored rigid ear or leg extending from adapter must be connected to a properly
grounded outlet - make certain it is grounded. If necessary, replace original outlet cover plate
screw with a longer screw that will secure adapter ear or lug to outlet cover plate and make
ground connection to grounded GFCI protected outlet.
Figure A
Grounding pin
120 VAC GFCI protected (Ground Fault Circuit Interrupt)
outlet via house panel breaker or GFCI outlet (not shown)
Use of an adapter is not allowed in Canada. If a grounding type receptacle is not available,
do not use this appliance until the proper GFCI protected outlet is installed by a qualified electrician.
SAFETY INSTRUCTIONS
1.5
Figure B
Adapter
Grounding means
Metal screw
4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

2701a

Table des Matières