Cleaning And Maintenance; Technical Data - Adler europe AD 5032 Mode D'emploi

Table des Matières

Publicité

need replacing.
1.
Use tap water only.
2.
Distilled and demineralized water makes the anti-calc system ineffective by altering its physicochemical characteristics.
ANTI-DRIP SYSTEM
This iron is equipped with drip stop function: the iron automatically stops steaming when the temperature is too low to prevent water from
dripping out of the soleplate.
With the anti-dripping system, you can perfectly iron even the most delicate fabrics.
AUTO SHUT-OFF SYSTEM
1.
An electronic safety device will automatically switch the heating element off if the iron has not been moved more than 30
seconds in a horizontal position. If in a vertical position, this will happen after 8 minutes.
To indicate that the heating element has been switch off, the heating indicator light (H) will turn off, and the power indicator light (M) will
start blinking, and with alarm 6 times.
2.
When picking up the iron again, the power indicator light (M) and the heating indicator light (H) will turn on. This indicates that
the iron is heating up again. Wait for the heating indicator light (H) to turn off. Then the iron
is ready for use.
AFTER IRONING:
To extend the working life of the iron, whenever you finish ironing, you are recommended to empty the reservoir as follows:
Unplug from the mains socket. Empty the iron by opening water tank cover and holding it with the tip pointing downwards. Shake it lightly
above a sink then close the cover. To dry the remaining moisture, turn the iron on again with the thermostat control knob (I) in the MAX
position with steam control switch (C) in MAX position until Power indicator light (M) goes off. Unplug from the mains socket and allow to
cool down. Clean the soleplate with a dry cloth as traces of moisture could mark it.

CLEANING AND MAINTENANCE

Before cleaning, remove the plug from the socket and allow the iron to cool down sufficiently.
1.
Wipe off the soleplate with a damp cloth and a non-abrasive (liquid) cleaner.
2.
If the fiber is adhered to the soleplate, use a damp cloth with vinegar to wipe off the soleplate.
3.
Never use strong acid or alkali in order to avoid damaging the soleplate.

TECHNICAL DATA:

Voltage: 220-240V ~50/60Hz
Power Nom.: 2400W
Power Max: 3000W
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT
DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF
1. Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund
von bestimmungswidriger Nutzung oder unsachgemäßer Bedienung entstanden sind.
2. Das Gerät ausschließlich an die Steckdose 220-240V ~50/60 Hz anschließen. Es darf
nicht zu anderen, bestimmungswidrigen Zwecken benutzt werden.
3. Wegen Vorsichtsmaßnahmen, sollten keine weiteren Geräte an den gleichen Stromkreis
angeschlossen werden.
4. Falls sich Kinder in der Nähe befinden, sollte bei der Nutzung des Gerätes spezielle
Vorsicht bewahrt werden. Dieses Gerät ist nicht zum Spielen für Kinder, sowie für
Erwachsene, die sich mit der Bedienungsanleitung nicht vertraut gemacht haben,
geeignet.
5. WARNHINWEIS: Dieses Gerät kann von Kindern im Alter von über 8 Jahren sowie von
Personen von einer beschränkten körperlichen, sensorischen, psychischen Fähigkeit oder
von Personen, die keine Erfahrung oder kein Kenntnisse von dem Gerät haben, nur dann
ALLGEMEINE SICHERHEITSVORSCHRIFTEN
DEUTSCH
6

Publicité

Table des Matières
loading

Table des Matières