Table des Matières
Publicité
when you rotate the iron, as in the tank, even when disconnected from the power
supply iron, may still be in hot water.
19. DO NOT allow for prolonged contact hot steam iron with fabric or flammable materials.
20. Be careful that the power cord does not touch the hot soleplate. Allow the iron to cool
completely before storage.
21. If you do not use iron, even for a short time, turn off the options of steam
22. Under no circumstances should be ironed clothes and fabrics that are on humans or
animals.
23. Never direct the steam to humans or pets.
24. Use self-cleaning function at least once a month.
25. Iron must be used at a stable even surface and this can only be disposed of.
26. Do not fill the water tank with chemicals, perfumes or descaling substance.
27. Do not fill the water tank over MAX level.
DESCRIPTION OF DEVICE
A. Spray nozzle
C. Steam control switch
E. Steam burst button
G. Rotary cable gland
I. Temperature control knob - thermostat
K. Water tank
M. Power indicator light
O. Silk – Wool fabric – two drops
INDICATOR LIGHT:
Plug in the iron, the power indicator light (M) turns on (always), when the thermostat works,
the heating indicator light (H) turns on, once the thermostat off work, the heating indicator light (H) turns off.
FILLING WITH WATER:
1.
Set the steam control (C) to "0" (= no steam).
2.
Open the water filling cover and turn the iron at a 45° angle to a flat, dry surface.
3.
Fill the water tank with water to "MAX".
4.
Push the water filling cover to close it.
PREPARATION:
Sort the laundry to be ironed according to the international symbols on the garment label, or if this is missing, according to the type of
fabric.
GARMENT
LABEL
Caution: If the fabric consists of various kinds of fibers, always select the lowest ironing temperature of the composition of those fibers.
Start ironing the garments requiring a low temperature. This reduces the waiting times (the iron takes less time to heat up than to cool
down) and eliminates the risk of scorching the fabric.
FIRST USE
When using the iron for the first time, you may notice a slight emission of smoke and hear some sounds made by the expanding plastics.
This is quite normal and it stops after a short time. We also recommend passing the iron over an ordinary cloth when using it for the first
time.
DRY IRONING (without steam) FUNCTION
1.
Connect the power cord of the appliance to the wall outlet.
2.
Turn the temperature control knob (I) to the desired temperature depending on the type of fabric you want to iron. Make sure
FABRIC
TYPE
synthetic
silk - wool
medium temperature
Cotton - linen
Fabric not to be ironed
B. The water inlet hole
D. Spray button
F. Power Cord
H. Heating / Thermostat indicator light
J. Self-clean button
L. Ceramic coated soleplate
N. Synthetic fabric – one drop
THERMOSTAT
REGULATION
·
low temperature
··
···
high temperature
4
Publicité
Table des Matières
