Eco-Flo EFSA Serie Manuel D'utilisation page 5

INSTALLATION
Inlet Pipe
For parts or assistance, call ECO-FLO Customer Service at 1-877 326-3561
Discharge piping can be
PVC, polypipe or
galvanized steel.
5
CAUTION:
Check local codes before installing
pump.
STEP 1:
Pump must be installed in a suitable
basin that is at least 14" wide.
STEP 2:
Pump must be placed on a hard sur-
face in a sump that has been cleared
of all debris. Never place the pump on
clay, earth or gravel surfaces and it is
suggested the pump be placed on two
bricks approximately 2" apart.
STEP 3:
Connect the discharge pipe, fittings
and check valve to the discharge port
of the pump. It is recommended that
the discharge pipe diameter be equal
to or larger than the discharge size of
the pump.